Salt-Away Mixing Unit

SALT-AWAY MIXING UNIT

Salt-Away’s Mixing Unit is the most popular way to dispense the Salt-Away Concentrate formula. It is especially packaged with parts to accommodate international customers whose local plumbing threads are different from American water hose threads. Included is ½ of a Quick Connector set (2 pieces) required to adapt the Salt-Away Mixing Unit to water hoses with threads different from American hose threads. The customer must supply the other ½ of a Quick Connector set made with threads that fit local water hoses to make the connection complete.

The Mixing Unit is the required delivery system for many Salt-Away applications, including Outboard, I/O, PWC Jet Engine Flushes, most Inboard Flushes, and Pressure Washers. For Pressure Washers, connect inline between the water hose and the hose inlet connection on the pressure washer. Either size reservoir, 6 fl oz (177 ml), or 12 fl oz (355 ml), can be chosen for any of these applications.

The Unit is constructed with a 3-position valve (Off, Rinse, Salt-Away). The receptacle holds 6 fl oz (177 ml) or 12 fl oz (355 ml). O-ring seals the receptacle to the body. For easy connection to hose fittings, the out-flow end is constructed with male threads and with female threads for the in-flow handle end.

Salt-Away is manufactured to be dispensed from the Mixing Unit at a ratio of 512 parts water to 1 part Salt-Away. The Salt-Away Mixing Unit was used in the vast majority of the testing performed in the development of Salt-Away.

The unit is warranted to withstand water pressure up to 60psi. Our claims for the performance and area coverage of Salt-Away are based on the use of this product. We recommend customers dispense Salt-Away using the Mixing Unit when the size of the project is appropriate for the unit.

Salt-Away is a water-based, non-hazardous, biodegradable solution and contains properties that dissolve, release and remove salt crystals from any surface. Water alone does not remove all the salt from a surface. Use of Salt-Away does not correct past damage but will work to protect against salt corrosion and reduces costly repairs caused by salt. Salt-Away breaks apart and removes saltaccumulation with repeated use.

Salt-Away can safely be used on all metals, fiberglass, paint, rubber, plastic, chrome, glass, concrete, brick or any surface exposed to salt. Salt-Away, mixed with water, washes away the salt then leaves a protective film on surfaces until surfaces are again exposed to water or salt. Special high-performing corrosion inhibitors in the product help protect metals from corroding if not rinsed off.

Salt-Away will not strip wax or cause streaks or spots. It is easy to apply by using pressure or power washers, Salt-Away’s special Mixing Unit, the ready-to-use spray bottles for smaller jobs, and by immersing items into a mixture of Salt-Away and water.

  • Non Hazardous. Contains no hazardous chemicals.
  • Non-Toxic. Safe to use around plants / children / pets and all living things.
  • Biodegradable. All ingredients biodegrade into the environment.
  • Environmentally Safe. Has no deleterious effects in the environment. Safe to discharge into normal drainage outlets connected to filter systems.
  • Water based.
  • Contains no petroleum products.
  • Contains no chemical solvents.
  • Does not react chemically or physically as an emulsifier on lubricants and coatings.
  • Inhibits rusting and corrosion.
  • Completely removes fresh salt.
  • Breaks down layers of salt accumulation.
  • Is chemically dissimilar to any competitive product.
  • Ingredients are the highest quality available.
  • Tested to be safe to use on virtually all surfaces.*
Including Magnesium, Aluminum, Iron, Copper, Steel, Stainless Steel, Chrome, Paint, Gel Coat, Nylon, Isinglass, Vinyl, Plastic, Glass, Wood, Leather, Rubber, Canvas, Concrete, and Brick.
+
Description

Salt-Away’s Mixing Unit is the most popular way to dispense the Salt-Away Concentrate formula. It is especially packaged with parts to accommodate international customers whose local plumbing threads are different from American water hose threads. Included is ½ of a Quick Connector set (2 pieces) required to adapt the Salt-Away Mixing Unit to water hoses with threads different from American hose threads. The customer must supply the other ½ of a Quick Connector set made with threads that fit local water hoses to make the connection complete.

The Mixing Unit is the required delivery system for many Salt-Away applications, including Outboard, I/O, PWC Jet Engine Flushes, most Inboard Flushes, and Pressure Washers. For Pressure Washers, connect inline between the water hose and the hose inlet connection on the pressure washer. Either size reservoir, 6 fl oz (177 ml), or 12 fl oz (355 ml), can be chosen for any of these applications.

The Unit is constructed with a 3-position valve (Off, Rinse, Salt-Away). The receptacle holds 6 fl oz (177 ml) or 12 fl oz (355 ml). O-ring seals the receptacle to the body. For easy connection to hose fittings, the out-flow end is constructed with male threads and with female threads for the in-flow handle end.

Salt-Away is manufactured to be dispensed from the Mixing Unit at a ratio of 512 parts water to 1 part Salt-Away. The Salt-Away Mixing Unit was used in the vast majority of the testing performed in the development of Salt-Away.

The unit is warranted to withstand water pressure up to 60psi. Our claims for the performance and area coverage of Salt-Away are based on the use of this product. We recommend customers dispense Salt-Away using the Mixing Unit when the size of the project is appropriate for the unit.

+
About Salt-Away

Salt-Away is a water-based, non-hazardous, biodegradable solution and contains properties that dissolve, release and remove salt crystals from any surface. Water alone does not remove all the salt from a surface. Use of Salt-Away does not correct past damage but will work to protect against salt corrosion and reduces costly repairs caused by salt. Salt-Away breaks apart and removes saltaccumulation with repeated use.

Salt-Away can safely be used on all metals, fiberglass, paint, rubber, plastic, chrome, glass, concrete, brick or any surface exposed to salt. Salt-Away, mixed with water, washes away the salt then leaves a protective film on surfaces until surfaces are again exposed to water or salt. Special high-performing corrosion inhibitors in the product help protect metals from corroding if not rinsed off.

Salt-Away will not strip wax or cause streaks or spots. It is easy to apply by using pressure or power washers, Salt-Away’s special Mixing Unit, the ready-to-use spray bottles for smaller jobs, and by immersing items into a mixture of Salt-Away and water.

  • Non Hazardous. Contains no hazardous chemicals.
  • Non-Toxic. Safe to use around plants / children / pets and all living things.
  • Biodegradable. All ingredients biodegrade into the environment.
  • Environmentally Safe. Has no deleterious effects in the environment. Safe to discharge into normal drainage outlets connected to filter systems.
  • Water based.
  • Contains no petroleum products.
  • Contains no chemical solvents.
  • Does not react chemically or physically as an emulsifier on lubricants and coatings.
  • Inhibits rusting and corrosion.
  • Completely removes fresh salt.
  • Breaks down layers of salt accumulation.
  • Is chemically dissimilar to any competitive product.
  • Ingredients are the highest quality available.
  • Tested to be safe to use on virtually all surfaces.*
Including Magnesium, Aluminum, Iron, Copper, Steel, Stainless Steel, Chrome, Paint, Gel Coat, Nylon, Isinglass, Vinyl, Plastic, Glass, Wood, Leather, Rubber, Canvas, Concrete, and Brick.
  • AED 150

Request Information

Your Name (required)

Your Email (required)

Subject

Your Message

Scroll to top